Melt Specification Data Sheet

Physical Properties 

Content: 20 oz. Mylar wallcovering (Textured Emboss) 
Mylar Backing: Non-woven  
Width: 52” 
Install Info: Straight; non-reversible 

Performance 

Fire Rating: Class A ASTM E84 
Flame Spread: Class A PASS  
Smoke Developed: Class A PASS  
Meets or exceeds all requirements of Federal Specification CCC-W-408 A/B/C/D 
Tensile Strength: 50 x 55 
Tear Strength: 25 x 25 
Color fastness to light: 200 hours / BS782 (UK) PASS 
Surface Resistance: PASS 
Abrasion Resistance: PASS 
Cleaning: Soft rag with water or gentle detergent. Do not scrub or use abrasives. 

NOTE* The assigned numerical reading & other tests referenced here are not intended to reflect hazards presented by this or any other material under actual fire conditions. Consult an architect or fire safety engineer for information on applicable building codes & reduction of fire hazards, including the use of sprinklers. 

Sustainability 

Printed with UV-curable inks that produce high image quality, improve productivity = time & cost savings. UV-curable printing may reduce the environmental impact of printing relative to solvent-based printing. 

Manufactured in the USA